Philips HTB3560 user manual Set up the wireless network

LAN

www

1 Using a network cable, connect the LAN connector on your home theater to the network router.

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [Network] > [Network Installation] > [Wired (Ethernet)].

5 Follow the onscreen instructions to complete the setup.

• If connection fails, select [Retry], and then press OK.

6 Select [Finish], and then press OK to exit.

•To view the network settings, select [Setup] > [Network] > [View Network Settings].

Set up the wireless network

Your home theater is Wi-Fi ready. Connect a Wi-Fi dongle for easy access to a wireless network.

What you need

•A network router (with DHCP enabled). For best wireless performance, coverage, and compatibility, use 802.11n router;

•Connect a Wi-Fi dongle (Model: Philips WUB1110, sold separately) to the connector on your home theater.

13EN

	Wi-Fi
	www
1	Press (Home).
2	Select [Setup], and then press OK.
3	Select [Network] > [Network
	installation] > [Wireless (Wi-Fi)], and
4	then press OK.
	Follow the onscreen instructions to select
	and set up the wireless network.
	• If connection fails, select [Retry], and
5	then press OK.
	Select [Finish], and then press OK to exit.
	• To view the network settings, select
	[Setup] > [Network] > [View
	wireless settings].