Philips 19C5808E specifications II Pin assignment

Page 22

E N

(II) Pin assignment:

1 5


6						10

11							15
	(1)

1	8
9	15
	(2)

(1) The 15-pin D-sub connector (male) of the signal cable:

Pin No.	Assignment		Pin No.	Assignment
1	Red video input		9	No pin
2	Green video input		10	Logic ground
3	Blue video input		11	Identical output
4	Identical output			- connected to pin 10
	- Connected to pin 10		12	Serial data line (SDA)
5	Ground		13	H. Sync / H+V
6	Red video ground		14	V. Sync (VCLK for DDC)
7	Green video ground		15	Data clock line (SCL)
8	Blue video ground

22

Image 22

Contents Table of Contents Other Language Versions Features IntroductionPage Safety precautions and maintenance End of life disposalInstallation Positioning / VentilationConnection Control locations and functions Descriptions of knobs and keypads on front control panelOSD menu tree structure Main Controls Screen Size and Position Color Temperature 5500˚K Photo RetouchSpecial Controls E C I a L Cont ROL SD Control S MER Advanced Controls Geometry Controls PincushionExit or Reset Self Test Factory preset mode Data StorageAutomatic Power Saving LEDSpecifications GeneralII Pin assignment Troubleshooting Having this PROBLEM? Check These ItemsNo Color If you are using a non-VESA-DDC Picture is not sharp Glossary