Troubleshooting
Having trouble? Something not working? Before calling for help, try these suggestions.
HAVING THIS PROBLEM? | CHECK THESE ITEMS | |
No Picture | Make sure the Power cable is plugged | |
(Power LED not lit) | into the wall outlet and into the back of | |
|
| the monitor. |
|
| The power button on top of the monitor |
|
| should be in the ON position. |
|
| Disconnect the monitor from the power |
|
| outlet for about one minute. |
No Picture | Make sure the computer is turned on. | |
(Power LED is amber | Make sure the monitor cable is or | |
yellow.) | connected properly to your computer. | |
|
| Check to see if the monitor cable has |
|
| bent pins. |
|
| The Automatic Power Saving may be |
|
| activated. |
No Picture | Make sure the Brightness and Contrast | |
(Power LED is green.) | controls are set correctly. | |
|
| Make sure the monitor cable is |
|
| connected properly to your computer. |
|
| Check to see if the monitor cable has |
|
| bent pins. |
|
| Make sure the computer power is on. |
Screen says | Make sure the monitor cable is connect | |
|
| properly to your computer. |
|
| Check to see if the monitor cable has |
NO S YNC I NPUT |
| |
|
| bent pins. |
when you turn on | Make sure the computer is turned on. | |
the monitor. |
| |
E N
23