Headset Operation (Cont.)
6.With the headband resting securely on the top of the head, check that the ear cups are centered over the ears. Reposition them if necessary by moving the headband sliders up or down (See Figure 9 on the next page). Proper performance depends on proper fit of the headset as described below.
7.Headband Pressure Adjustments:
There are three pressure settings. Increasing the pressure will improve the seal between the earcup and the head for greater noise reduction. To change the pressure setting, remove the headset and fold the earcup inward as shown in Figure 8, then rotate the Comfort Camtm to the desired setting. Repeat for both earcups. Both sides of the headband should be set to the same pressure setting to keep the headband properly centered on the head.
| Comfort Camtm Adjustment Settings | ||
| KNOB ADJUSTMENT SETTINGS | ||
| HIGH | MEDIUM | LOW |
Side View | Top View |
| |
| Figure 8 |
|
|
Headband Pressure Adjustment |
| ||
Page 4