Back Panel Features Power Switch, DDT Switch

carefully chosen to allow continuous power output performance while still protecting the power trans- former. Normally, these breakers should not trip unless there is a fault in the amplifier circuitry that draws excessive mains current. However, abnormal conditions such as a short circuit on either or both channels, or continuous operation at overload or clipping (especially into 2 ohm loads) will cause the breaker to trip. If this occurs, turn the power switch off, then simply reset the breaker and correct the cause of the overload.

When tripped, the button on the breaker will be outward nearly l/2” and can be reset A by pushing inward. A normal reset button length is about l/4”. If this “thermal” type

breaker does trip, simply pushing the button back in will reset it, after waiting a brief period of time to allow it to cool down. REMEMBER, ALWAYS TURN THE POWER OFF BEFORE RESETTING THE BREAKER. If the breaker trips instantly each time you attempt to reset it, the unit should be taken to a qualified service center for repair.

Back Panel

BACK PANEL FEATURES

POWER SWITCH (4)

A heavy-duty, rocker-type switch. Selecting the “0” position turns off the power amplifier.

DDT SWITCH (5)

This switch is used to either Enable or Defeat the DDT compressor. Normally the DDT function should be enabled to minimize the possibility of either or both channels going into clipping or overload. With DDT defeated, a severe overload could cause the mains circuit breakers to trip as a matter of course. (The Peavey DDT compression system will be covered in greater detail later in this manual.)

MODE SWITCH (6)

This switch is used to select either Stereo or Bridge mode of operation. Care should be exercised whenever the Bridge mode is selected. Accidental selection of this mode could damage loudspeakers, particularly in biamped systems. (The Bridge mode will be covered in greater detail later in this manual.)

INPUT GAIN (7)

These controls are used to adjust the input gain of each channel. Thus, they determine how “loud” each channel of the power amplifier will “play”for a given input signal level. Maximum input gain (minimum sensitivity rating) is achieved at the full clockwise setting, and this setting yields maximum mixer/system headroom. A setting of less than full clockwise will yield lower system noise at the expense of mixer/ system headroom.

PV 2000 specifications

The Peavey PV 2000 is a professional power amplifier widely recognized for its robust performance and dependable design, tailored for various sound reinforcement applications. With a solid construction and intuitive operation, it caters to musicians, DJs, and audio engineers alike. This amplifier embodies Peavey's commitment to high-quality audio solutions and versatility.

At the heart of the PV 2000 is its impressive power output, delivering 1000 watts per channel at 4 ohms, allowing it to drive demanding speaker systems with ease. For users requiring even more headroom, the amplifier outputs 2000 watts at bridged mode (8 ohms), ensuring that it can handle a diverse range of venues, from intimate settings to larger auditoriums.

One of the standout features of the PV 2000 is its efficient Class D design. This technology not only provides exceptional sound quality, but it also contributes to a lightweight and compact profile, making transportation and setup significantly less cumbersome. It is built to endure rigorous touring conditions while still producing the clarity and punch that professional audio demands.

The amplifier includes an advanced cooling system featuring an internal fan for thermal management, protecting the unit from overheating during extended operation. The internal circuitry is designed to minimize distortion, ensuring that the audio output remains clean and powerful, even at high volumes.

The PV 2000 is equipped with comprehensive input and output options, including XLR and 1/4-inch TRS inputs, allowing seamless integration into any sound system. The outputs provide both Speakon and binding posts, catering to various speaker connections. Additionally, built-in high-pass and low-pass filters allow users to fine-tune the output, tailoring the sound to their specific needs.

With features like LED indicators for power, signal, and clipping, the PV 2000 offers an intuitive user experience. Overall, the Peavey PV 2000 power amplifier combines reliability, efficiency, and exceptional sound quality, making it an ideal choice for audio professionals seeking a powerful solution for their amplification needs. Whether for live performances, installations, or studio environments, the PV 2000 delivers outstanding performance time and time again.