Peavey Special 212 manual Back Panel Features Ground Switch, External Speaker Jack, Effects Return

Page 5

Back Panel:

Q24

BACK PANEL FEATURES

GROUND SWITCH (24)

Three position rocker-type switch, which, in most applications, should be operated in its center or zero position. There may be some situations when audible hum and/or noise will come from the loudspeaker. If this situation arises, position the ground switch to either positive or negative (+ or -) until the noise is mini- mized.

Note: Should the noise problem continue, consult your Authorized Peavey Dealer, the Peavey Factory, or a qualified service technician. THE GROUND SWITCH IS NOT FUNCTIONAL ON 220/240 VOLT MODELS.

AC LINE CORD-120 V products only (25)

A For your safety, we have incorporated a three-wire line (mains) cable with proper grounding facilities. It is not advisable to remove the ground pin under any circumstances. If it is neces- sary to use the equipment without proper grounding facilities, suitable grounding adaptors should be used. Less noise and greatly reduced shock hazard exists when the unit is oper- ated with the proper grounded receptacles.

EXTERNAL SPEAKER JACK (26)

Provided for connection of external speaker cabinet. Minimum external speaker impedance A is 8 ohms.

EFFECTS RETURN (27)

Input for returning signals from external low-level effects or signal processing equipment.

EFFECTS SEND (28)

Output for supplying signals to external low-level effects or signal processing equipment.

EFFECTS LEVEL SWITCH (29)

Selects the effects loop operating level: -10 dBV (0.3V RMS) when “out” and 0dBV (1 V RMS) when “in.”

POWER AMP INPUT (30)

Used to connect Line Level signal to the power amplifier.

PREAMP OUT (31)

The preamp out can be used to route the amplified signal to a mixing console, tape recorder, etc. Connect the preamp output using a shielded cable to an input of the tape recorder, mixer, etc. This patch does not affect the operation of the amplifier.

REMOTE FOOTSWITCH JACK (32)

Provided for the connection of the supplied remote footswitch. The footswitch is used to select the Ultra Gain, Lead Gain, or Clean channel and defeat Reverb. When using remote footswitch, always insert the plug fully (second click) to ensure proper operation.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Page Bright Switch Front Panel Features High Gain InputChannel Select Switch LOW Gain InputGain Switch 8 VolumeThrash Switch Shift SwitchEffects Level Switch Back Panel Features Ground SwitchPower AMP Input Remote Footswitch JackPreamp Section Page LOW Gain Input Entrada de baja ganancia Bright Switch Interruptor de brilloChannel Select Switch Interruptor para selecch del canal Gain Switch Interruptor de ganancia 8,13 Volume El volumenThrash Switch Conmutador de batido Shift Switch Interruptor de desplazamientoFuncicns DEL Tablero Trasero Channel Select Switch Selecteur de canal Bright Switch Mecteur de brillanceCaracteristiques DU Panneau Avant High Gain Input Entree haut gainThrash Switch Commutateur anti-emballement Gain Switch Interrupteur de gain 8Dynamics Control Commande Dynamique Tj Power Switch Interrupteur d’alimentationPower AMP Input Entree ampli de puissance Effects Level Switch Commutateur de niveau d’effetsRemote Footswitch Jack Prise pour interrupteur a distance External Speaker Jack Prise pour haut-parleur externeLOW Gain Input Tiefen gain-Eingang Beschreibung DER FrontplatteHigh Gain Input Hijhen gain-Eingting PRE Gain 7 Power Switch NetzschalterReverb Level Reverb-Pegel Resonance ResonanzBeschreibung DER Ruckplatte Page Peavey ONE-YEAR Limited WARRANTY/REMEDY Important Safety Instructions #80300316

Special 212 specifications

The Peavey Special 212 is a versatile and powerful guitar amplifier known for its rich tonal character and reliable performance. It is part of Peavey's long-standing reputation for creating durable and dynamic amplifiers that cater to a wide range of musical styles. This amp is particularly favored by country, rock, and blues musicians, due to its warm sound and adaptability.

One of the standout features of the Peavey Special 212 is its two channel design, which allows players to easily switch between clean and overdriven tones. Each channel is equipped with its own set of controls for gain, treble, mid, bass, and reverb, giving musicians the ability to shape their sound to suit various playing styles. The clean channel provides a bright, articulate tone, while the overdrive channel delivers a punchy, aggressive sound, perfect for solos and heavier music.

This amplifier also boasts a powerful 60-watt output, driven by two 12-inch speakers. The speaker configuration enhances both clarity and depth, enabling the amp to handle everything from subtle riffs to powerful chords without distortion or muddiness. The design of the enclosure further complements sound projection, making it suitable for any stage performance or practice setting.

Technologically, the Peavey Special 212 utilizes the company’s patented TransTube technology, which emulates the warm tonal characteristics of tube amplifiers while providing solid-state reliability. This innovative technology allows players to achieve rich, dynamic sounds without the maintenance often associated with traditional tube amps. Additionally, the built-in effects loop provides even greater flexibility, allowing musicians to integrate their favorite pedals and effects seamlessly into their rig.

The amplifier’s rugged construction is also noteworthy. Built to withstand the rigors of transport and stage use, the Special 212 features a sturdy cabinet and reinforced corners, ensuring it remains reliable under pressure. The front control panel is intuitive and easy to navigate, with clear labeling for all settings and adjustments.

Overall, the Peavey Special 212 is an exceptional choice for guitarists seeking a reliable, versatile, and robust amplifier. With its powerful output, advanced technology, and user-friendly design, it remains a favored option among both amateur and professional musicians, providing an impressive range of sounds suitable for any genre.
Top Page Image Contents