Power Amplifiers, Unpacking, Mounting | Peavey CS 4080 HZ, CS 3000

ENGLISH

CS® 3000/4000/4080 HZ

Power Amplifiers

Congratulations on your purchase of a Peavey CS Series power amplifier! Designed for years of reliable operation, CS Series amplifiers offer the sonic superiority and unsurpassed reliability for which Peavey is famous in a rugged, compact unit. Advanced technologies and extensive protection circuitry allow operation with greater efficiency, even under difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuit ensures trouble-free operation into loads as low as 2 ohms (4 ohms for model CS 4080 HZ), protects speakers and ensures, protects drivers and ensures sonic integrity even in extreme overload conditions. Peavey’s high-efficiency design uses tunnel-cooled heat sinks and dual-speed DC fans for consistent lower overall operating temperature, resulting in longer output transistor life.

Peavey CS Series amplifiers are simple to operate and housed in ultra-strong steel chassis, but improper use can be dangerous. Some CS Series amplifiers are very high powered and can put out high voltages and sizable currents at frequencies up to 30 kHz. Always use safe operating techniques with these amplifiers.

FOR YOUR SAFETY, READ THE IMPORTANT PRECAUTIONS SECTION, AS WELL AS INPUT, OUTPUT AND POWER CONNECTION SECTIONS.

Unpacking

Upon unpacking, inspect the amplifier. If you find any damage, notify your supplier immediately. Only the consignee (the supplier from whom you purchased the amplifier) may institute a claim with the carrier for damage incurred during shipping. Be sure to save the carton and all packing materials. Should you ever need to ship the unit back to Peavey or one of its offices, service centers or the supplier, use only the original factory packing. If the shipping carton is unavailable, contact Peavey to obtain a replacement.

Mounting

CS Series amplifiers will mount in standard 19" racks. Rear mounting ears are also provided for additional support, which is recommended in non-permanent installations like mobile or touring sound systems. Because of the cables and connectors on the rear panel, a right angle or offset screwdriver or hex key will make it easier to fasten the rear mounting ears to the rails.

Cooling Requirements

CS Series amplifiers use a forced-air cooling system to maintain a low, consistent operating temperature. Air is drawn into the amplifier by fans on the back panel and courses through the cooling fins of the tunnel-configured channel heat sinks, then exhausts through the front panel grilles. If either heat sink gets too hot, a sensing circuit will disconnect the load for that particular channel. It is important to have an air inlet at the back of the amplifier to allow cooling air to enter. If the amp is rack mounted, do not use doors or covers on the back of the rack, as the intake air must flow without resistance. Make sure that there is one (1) standard rack space opening for every three mounted power amplifiers.

CS 4080 HZ, CS 3000 specifications

The Peavey CS 3000 and CS 4080 HZ are powerhouse amplifiers designed for professional audio applications, catering to both musicians and sound engineers who require reliability and sonic excellence. These models are a part of Peavey's renowned CS series and offer a wide array of features and technologies to enhance performance and sound quality.

The Peavey CS 3000 delivers a robust performance with a power output of 2,400 watts at 4 ohms. This amplifier is particularly favored for its ability to handle demanding workloads while maintaining clarity and precision in sound reproduction. One of the standout features of the CS 3000 is its patented Peavey DDT (Distortion Detection Technique) compression, which automatically engages when the amplifier approaches its limits. This technology helps prevent clipping, ensuring a cleaner sound even at high volumes, making it ideal for live sound applications.

The CS 4080 HZ, on the other hand, is designed for high-frequency applications, providing 4,000 watts of output. This model features advanced circuitry that enhances its performance when powering high-impedance loads. Users will appreciate the built-in crossover networks that allow for precise tuning and integration with various sound systems, making it suitable for both bi-amp and full-range applications.

Both amplifiers feature Peavey's proprietary Turbosound speaker connections, which ensure a secure and efficient signal transfer, reducing the chances of interference or signal loss during use. The rugged chassis and heat management system are engineered for optimal airflow, preventing overheating during long sessions or extensive use, which is crucial in live sound settings.

Moreover, the CS 3000 and CS 4080 HZ incorporate comprehensive protection circuitry. This not only safeguards the amplifiers from damage due to overheating or short-circuit conditions but also extends the longevity of the units. The simple front-panel controls and status indicators allow users to easily monitor performance, making adjustments quickly as needed.

In summary, the Peavey CS 3000 and CS 4080 HZ stand out for their exceptional power, innovative technology, and durability. These amplifiers are engineered to meet the rigorous demands of professional audio environments, providing reliable performance for musicians, DJs, and sound technicians alike. Whether you're setting up for a concert or managing an event, these amplifiers prove to be indispensable tools for achieving high-quality audio experiences.