Addressing
When the CPU IP is situated within the local network, you will need to give it an appropriate local IP address and IP network mask. This is achieved most easily using the DHCP server option which will apply these details automatically. If
a DHCP server is not available on the network, then these details need to be applied manually in accordance with the network administrator.
The firewall/router must then be informed to route incoming requests to port 5900 or port 80 (if available) through to the local address being used by the CPU IP.
To discover a DHCP-allocated IP address
Once a DHCP server has allocated an IP address, you will need to know it in order to access the CPU IP via a network connection. To discover the allocated IP address:
1In either the local or remote Network configuration screens, set the ‘Use DHCP’ option to ‘Yes’ and select ‘Save’. Once the page is saved, the CPU IP will contact the DHCP server and obtain a new address.
2
DNS addressing
As with any other network device, you can arrange for your CPU IP to be accessible using a name, rather than an IP address. This can be achieved in two main ways:
CPU IP has a local address and net mask, i.e.
IP address: 192.168.0.3
Net mask: 255.255.255.0
IP
Access Switch Plus
LOC REM VNC 100 LNK PWR
Remote user with VNC viewer accesses IP
Internetaddress: 129.7.1.10 and automatically uses port
5900.
Firewall/router address: 129.7.1.10
The firewall routes the request from the VNC viewer on port 5900 through to the CPU IP at local address 192.168.0.3
•For small networks that do not have a DNS (Domain Name System) server, edit the ‘hosts’ files on the appropriate remote systems. Using the hosts file, you can manually link the CPU IP’s address to the required name.
•For larger networks, declare the IP address and required name to the DNS server of your local network.
The actual steps required to achieve either of these options are beyond the scope of this document.
18