Selects the channel specified by {number}. This allows ports on cascaded units to be selected. For example HOTKEYs + 0 10216 would select port 1 (01) on the current LINDY Dual/Quad PRO, port 2 (02) on the next cascaded LINDY Dual/Quad PRO and port 16 on the last LINDY Dual/Quad PRO.
Examples of common hotkey sequences (assuming CTRL + ALT hotkey option):
To select channel 2:
press ba2 release 2ba
To 'tab through' channels:
press ba v release v pressv release v pressv release vba
To select channel 12 (on a 12 or 16 port LINDY Quad PRO):
press ba1 release 1
press 2 release 2ba
4.9 Selecting computers using the mouse
Computers may conveniently be selected using a three button mouse. In order to switch to the next computer simply hold down the central mouse button (the wheel mouse button on an IntelliMouse) and click on the left hand mouse button to select the next computer. If password security has been set then the LINDY Dual/Quad PRO will select the next available channel, otherwise it will select the next numerical channel. Mouse switching may be enabled or disabled (see section 3.6.7). When mouse switching is disabled the third button or wheel button state is ‘passed through’ the LINDY Dual/Quad PRO and seen by the application software.
Selecting computers using the mouse is most suitable for systems with small numbers of computers. For systems with more computers it is easier to use the on- screen menu for computer selection.
LINDY Dual/Quad PRO | Installation and Use | Page 45 |