10. DEFAULT SETTINGS
In order to restore the default settings the IPower Control must be started in boot mode (see section 7). Launch IPCnet_conf.exe.
After the program has opened, all IPower Control units which are on the network will be listed on the left hand side of the program window. Select the one for which the setting should be restored and click on Program Device/Format Eeprom.
Please note that all current settings will be deleted. When the IPower Control is restarted the default settings will be loaded.
After the default settings have been restored the
IPower Control must be set up again (section 1).
11. TECHNICAL DATA
Network Connection: | 10Mbit |
Network protocol: | TCP/IP |
Switched power (per port): | max. 2000W |
Switched power (total): | max. 3000W |
Operating temperature: | 0oC – 50oC |
Dimensions: | 19” / 1U height |
Note: The IPower Control was developed for use with IT devices. Using the IPower Control with devices which have a high initial current surge (like halogen lamps) is not recommended.