2. Installation
2.1 What you will need
Cables to connect the CPU Switch Smart SUN-MAC-PC to each of your computers. These cables are specially constructed for use with the CPU Switch Smart SUN-MAC-PC and may be purchased from your CPU Switch Smart SUN- MAC-PC supplier. Cable specifications and part codes are given in appendix A.
A suitable keyboard. Supported types are:
1)A Sun keyboard with an 8 pin mini-DIN connector (recommended if you are going to connect any Sun computers to the MP).
2)A standard PC style keyboard with a 6 pin mini-DIN PS/2 style connector.
3)A standard PC style keyboard with a 5 pin DIN connector and an AT to PS/2 keyboard adapter (5 pin DIN to 6 pin mini-DIN)
A suitable mouse. If you wish to use the mouse to switch the CPU Switch Smart SUN-MAC-PC's channel then you will need a three button mouse or an IntelliMouse. Supported types are:
1)A standard PC style two or three button Microsoft or Logitech compatible mouse or a Microsoft IntelliMouse compatible mouse with a 6-pin mini-DIN connector.
2)A Sun mouse of the type that plugs into the Sun keyboard. This should have an 8 pin mini-DIN connector.
A monitor with a standard VGA/SVGA (15 pin) connector that will work when connected directly to each of your computers. CPU Switch Smart SUN-MAC-PC supports low and high resolution monitors. If you have a monitor with a 13 pin 13W3 connector of the type that was traditionally used to connect to older Sun computers then you will need an adapter to convert this to the 15 pin format - please contact your CPU Switch Smart SUN-MAC-PC supplier.
CPU Switch Smart SUN-MAC-PCInstallation and Use | Page 11 |
