Wireless Projector Server | User Manual |
The Administrator Utility
The Projector Server’s Administrator Utility is a browser based utility which allows you to modify or change the password, network and encryption settings. To configure the network and encryption settings, some basic knowledge of Ethernet and TCP/IP protocols is essential.
Accessing the Administrator Utility
Note: It is recommended that you disable the proxy server in your browser. The proxy server may block your access to the Projector Server!
1.Set up the Projector Server (See Page 7). The Main Console Screen will appear. Ensure the Projector Server is connected to your LAN or WLAN.
2.Make a note of the IP address shown in the lower part of the Main Console Screen.
3.Open a web browser (MS Explorer or Netscape) on your PC and enter the IP address as noted in Step 1:
4. Enter the password (default: 654321) and click LOGIN.
19