IOGear Q1338 quick start HardwareHardwareInstallationInstallation

Page 5

HardwareHardwareInstallationInstallation

Note: Before you begin, please make sure that the power to the device and your computer has been turned off.

Step 1.

Plug the USB 3.0 Micro-B connector into the Multi-Card Reader / Writer’s USB 3.0 Type mini-B port

Step 2.

Plug the USB 3.0 standard A connector into the computer’s USB 3.0 port.

Image 5
Contents Quick Start Guide System Requirements Package ContentsSdhc Sdxc Introduction Start HereMMC HS-MMCCF-PSP MS-DUOHardwareHardwareInstallationInstallation Page Contact WarrantyGreen FUN