KTI Networks KS-117FM-V, KS-115FM-V manual 2 802.1Q Vlan

Page 27

3.4.2 802.1Q VLAN

Click [VLAN Mapping Table]

This page is used to setup member ports for each VLAN group. Total of 16 VLAN groups are supported. Actually, the table are shared by Port- based VLAN mode and 802.1Q VLAN mode.

The steps to configure the member ports are:

1.Select Group number : 0 ~ 15.

2.Set [Yes] on the selected port to include it into the member port list.

802.1Q VLAN group mapping is dependent on the received packet type: Untagged packet - Use the least four bits of PVID value of the input port Tagged packet - Use the least four bits of the VID value of the packet

-27-

Image 27

Contents Installation Guide United States Trademarks Table of Contents KS-117FM-V series KS-115FM-V seriesFeatures Specifications FX Port Optical Specifications Management Specifications Unpacking Supply the PowerChecking AC Power Installing the SwitchTP Ports FX Port Port ConfigurationVlan Function Port-based Vlan Mode802.1Q Vlan Mode Received untagged packet output toReceived tagged packet output to Factory Default Settings Push Button IP SW Dhcp and IP ConfigurationDhcp mode Static IP modeAuto-MDI-X Function TP Port ConfigurationMaking UTP Connections Speed Cables used DistanceMaking Fiber Connection Model Ext Connector Cable Max. DistanceLED Indications FunctionsState Indication Web Browser Web BrowserStart connection Page ReBoot Device Port SetupIP Setup Vlan SetupAuto-negotiation Port SetupPort Status LinkIP Setup Vlan Mode Select Vlan SetupClick Vlan Mapping Table Port-based VlanClick Port Pvid Setting 2 802.1Q Vlan Click Port Pvid Setting Received untagged packet output to Password Setup Restore Default ReBoot Device About Settings Effective Time of Changes Settings Factory Default Values

Related manuals

Manual 34 pages 10.55 Kb