Thermal System, High Temperature Limits

Often studio engineers feel the need to defeat the DDT compressor, for fear it might color the sound in studio listening. The DDT compressor is only activated when clipping is imminent. Until this occurs, it’s simply a passive friend. The only reason the defeat switch is there in the first place is to allow check-out technicians to evaluate the power amplifier at clipping. Valuable performance information, such as power- supply ripple and regulation, can only be assessed when an amplifier is allowed to clip.

THERMAL SYSTEM

The CS 1000X has a unique thermal system that employs a tunnel-type heat sink design to provide maxi- mum cooling for the 24 power transistors (12 for each channel). A single 100 CFM fan mounted on the back panel of the unit provides an almost unrestricted airflow through the tunnel to provide the lowest possible operating temperature for the power devices. This approach is so efficient that even continuous operation into 2 ohms will not cause a thermal shutdown unless the ambient air temperature is considerably higher than normal (above 40” C). Under normal intermittent applications, low-speed fan operation will provide adequate cooling. Since the CS 1000X is a two-channel amplifier, but only one fan is employed, the fan circuitry is an independent system, separately fused internally. You will notice that the heat sink compo- nents are divided horizontally. The lower half contains Channel A output transistors, while the upper half belongs to Channel B. The fan provides equal cooling for both channels. Each channel has separate built-in thermal sensors and fault logic circuitry. If one channel’s heat sink reaches an operating temperature of 60°C its logic will cause high-speed fan operation irrespective of the other channel’s operating temperature. In other words, either channel’s heating will control the fan speed. Under normal continuous usage at full- rated power output into the rated load, the thermal logic system will continuously monitor heat sink tem- peratures and will automatically select the fan speed required to maintain safe operating limits for the power transistors.

HIGH TEMPERATURE LIMITS

Because of the very efficient design of the CS 1000X heat tunnel dissipation system, thermal shutdown conditions will almost never occur unless there is truly an external fault. For continuous operation, the CS 1000X requires a source of cool air. As an added help in locating mismatched or shorted speakers, the DDT active LED is a powerful tool. If this LED flashes continuously at relatively low-output power levels (indicated by low-power readings on the LED array), it is almost a sure sign that the amplifier loading impedance is too low in value, or that there might be a short circuit. Remember, usually the power LED array should reach 100% before the DDT system is activated on any particular channel. The CS 1000X also has a fail-safe thermal mechanism built into the unit. If ither channel’s thermal logic system should fail to cause thermal shutdown in that channel or if the fan itself should fail, this fail-safe system will shut down the entire amplifier, just as if you had turned off the power switch. This is just one more protection that Peavey has incorporated into this unique amplifier as a backup system. If this should ever occur, immedi- ately seek professional help at an authorized Peavey service center.

PASSIVE CROSSOVER

The purpose of a traditional high-level passive crossover found inside most speaker systems is to separate the low-frequency material from the program and feed it to the woofer (low-frequency driver), and to separate the high-frequency material from the program and feed it to the tweeter (high-frequency driver). This crossover is connected between a power amplifier and the speakers, and, as its name implies, is made up entirely of passive components (no transistors or tubes). Such a system is usually referred to as “full- range,” which simply means that the power amplifier must handle the full range of frequencies. There are many good reasons for using a biamplified professional system as opposed to a full-range system. One reason is that the biamp system will provide more headroom with the same power amplifier complement than that of the full-range system.

CS 1000X specifications

The Peavey CS 1000X is a professional power amplifier designed to deliver exceptional sound quality and reliability for live performances and installed sound applications. Renowned for its rugged build and innovative technologies, the CS 1000X has become a staple in various settings such as concert venues, clubs, and corporate events.

One of the standout features of the CS 1000X is its power output. It provides 1,000 watts of continuous output at 4 ohms, making it capable of driving large audio systems with ease. This significant power ensures that even the most demanding musical passages can be reproduced accurately without distortion. Its high-efficiency design enables it to deliver exceptional performance while consuming less energy, making it not only powerful but also environmentally friendly.

The amplifier utilizes a patented Peavey Dynamic FET technology, which enhances the overall sound quality by providing a wide frequency response and minimal distortion levels. This technology also contributes to the amplifier's impressive dynamic range, ensuring that both soft and loud sounds are reproduced with clarity and precision.

The CS 1000X features advanced circuit protection systems, including Peavey's exclusive DDT (Dynamic Distortion Termination) clipping protection. This feature prevents distortion and potential damage to connected speakers during peak output, allowing for safe operation under high-demand conditions. Additionally, the amplifier includes a built-in cooling fan that ensures optimal thermal management, prolonging the lifespan of the unit.

In terms of connectivity, the CS 1000X is equipped with a variety of input and output options. These include balanced XLR inputs and both binding post and SpeakON outputs, providing flexibility for different configuration needs. The rear panel also features level controls, allowing users to adjust the output level to suit the requirements of their specific audio setup.

Compact yet powerful, the Peavey CS 1000X is designed with a rugged chassis that can withstand the rigors of transport and installation. This durability, paired with its technical capabilities, makes it an excellent choice for both professional musicians and sound engineers.

In summary, the Peavey CS 1000X power amplifier stands at the forefront of audio technology, combining robust power, advanced protection features, and versatile connectivity options. Its ability to deliver high-quality sound makes it an indispensable tool for any serious audio application.