KTI Networks KCD-303P-A2 manual Introduction, Plug and Play, POF Connectivity, Industrial Features

Page 5

1.Introduction

The industrial rated KCD-303P series supports three switched connections including copper and fiber for networks over POF (Plastic Optical Fiber). The copper ports support 10/100Mbps auto-negotiation and auto-MDI/MDIX for Cat.5 plug-and-play. The fiber ports support plug-less connections of high bandwidth 100Mbps data rate over POF cables. POF technology offers a complementary solution to UTP copper wire for industrial, office and home networks because it is low cost, weight little, thin, easy and safe to install and electronic noise immunity.

Depending on the types of the network ports and the supported POF cables, several different models are defined as follows:

Model

Copper Port (RJ-45)

Fiber Port (POF)

POF Support

 

 

 

 

KCD-303P-A1

2 ports

1 port

1.5mm

 

 

 

 

KCD-303P-A2

2 ports

1 port

2.2mm

 

 

 

 

KCD-303P-B1

1 port

2 ports

1.5mm

 

 

 

 

KCD-303P-B2

1 port

2 ports

2.2mm

 

 

 

 

The switch also provide the following advantages:

Plug and Play

No configuration is required in using the switches. With the featured auto-negotiation function, the switches can detect and configure the connection speed and duplex automatically for the copper ports. The switches also provide auto MDI/MDI-X function, which can detect the connected cable and switch the transmission wire pair and receiving pair automatically. This auto-crossover function can simplify the type of network cables used.

POF Connectivity

The switches support plug-less POF connection. Both model series offer an ideal solution for POF deployment in home and industrial networks. For the application need, 1.5mm POF and 2.2mm POF are supported in different models.

Industrial Features

For industrial environment, the main devices are designed with the following enhanced features exceeding that of commercial Ethernet switches:

High and wide operating temperature

5/18

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Guide International United StatesTrademarks Table of Contents Introduction Industrial FeaturesPlug and Play POF ConnectivityProduct Panels FeaturesPOF Ports SpecificationsCopper Ports DC in Power Input Switch FunctionsMechanical EnvironmentalUnpacking InstallationSafety Cautions Mounting on a Wall Panel Mounting Din-Rail Mounting Applying Power with Power Adapter Applying Power via USB Making Copper Port RJ-45 Connections Making LAN ConnectionsNetwork Cables Auto MDI/MDI-X FunctionPOF Connector Easy POF InstallationMaking POF Connections POF CableFunction State Interpretation LED IndicationApplication in Industrial Networks ApplicationsApplication For Home Network Copper to POF Media Converter Application

KCD-303P-B2, KCD-303P-B1, KCD-303P-A2, KCD-303P-A1 specifications

KTI Networks has established itself as a formidable competitor in the field of networking solutions, particularly with its series of ruggedized industrial Ethernet switches. Among their offerings, the KCD-303P series, which includes models KCD-303P-B2, KCD-303P-A1, KCD-303P-A2, and KCD-303P-B1, stands out for its remarkable features and capabilities designed for demanding environments.

The KCD-303P series switches are built to meet the needs of industrial applications, where reliability, robustness, and performance are crucial. These switches are equipped with 10/100Mbps autosensing Ethernet ports, allowing for seamless integration into existing networks. With a total of 5 ports available, including 4 PoE (Power over Ethernet) ports, the KCD-303P models can deliver both data and power to devices such as IP cameras, wireless access points, and VoIP phones. This capability reduces the need for additional cabling and simplifies the installation process.

One of the key features of the KCD-303P-B2, KCD-303P-A1, KCD-303P-A2, and KCD-303P-B1 is their adherence to IEEE 802.3 standards, ensuring compatibility with a wide range of network devices. Additionally, these models support VLAN and QoS (Quality of Service) features, enabling users to prioritize traffic and improve overall network efficiency.

The rugged design of the KCD-303P switches ensures they can operate in extreme conditions. With a wide operating temperature range, they are suitable for use in environments that experience significant temperature fluctuations, making them ideal for factories, outdoor installations, and less controlled settings. The compact metal housing not only provides durability but also enhances heat dissipation, ensuring optimal device performance.

In terms of power redundancy, the KCD-303P series supports dual power inputs, ensuring that the device remains operational even in the event of a power failure. This feature enhances reliability in critical applications where downtime can lead to significant operational losses.

Moreover, the switches come equipped with LED indicators that facilitate easy monitoring of connectivity and power status, making it simpler to manage and diagnose network issues.

In conclusion, the KTI Networks KCD-303P series, including the KCD-303P-B2, KCD-303P-A1, KCD-303P-A2, and KCD-303P-B1, are exceptional choices for industrial networking solutions. Their advanced features, robust design, and emphasis on reliability make them suitable for a wide range of applications, from manufacturing to transportation. With these models, KTI Networks continues to support industries in achieving efficient and reliable networking solutions.
Top Page Image Contents