KTI Networks KS-2240 manual Installing the Switch, Packing List

Page 10

2. Installing the Switch

The switch is designed to operate in workgroup environments without a complicated configuration procedure. It also features an auto-select 100- 240V, 50/60Hz power supply unit, which works in most countries around the world.

Before connecting the supplied power cord into the switch, check to see that the cord voltage and current rating conform to the standards of the country of operation.

2.1 Packing List

The switch has the following components shipped with it:

•One switch unit

•One AC power cord

•One RS232 console cable

•19-inch rack mount kit

•CD for installation guide, software modules, MIB file and software operation manuals

-10-

Image 10

Contents Installation Guide 10/100 Fast Ethernet Switch With Gigabit UplinksKS-2240 International Fax 886-2-26983873 Mail Kti@ktinet.com.tw Port Fast Ethernet Switch With Gigabit Uplinks Installation GuideTrademarks Table of Contents Introduction Features Igmp MIB Specifications Installing the Switch Packing ListPanels Gigabit Slot2Mounting the Switches Desktop MountingNetwork Switched Ports Making Network Connections10/100BASE-TX Fast Ethernet Switched Ports Manual Configuration Switch can support connections to the following devices10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Module Outline Gigabit Ethernet SlotsGigabit Ethernet Modules Top view Duplex Mode Full duplex Making Trunk Connections Page Virtual LAN Vlan Static Definitions of Vlan MembershipPage Interpretation LED IndicatorsLED Panels States and indications arePerforming Network Management Management SupportLogin Basic Management Activities Management objectsSetting IP Address Console Management Navigating Through the Console Interface To Press This KeyWeb Management Telnet ManagementSoftware Upgrade Snmp and Rmon ManagementSupport Contact your dealer for any new available software version