KTI Networks KS-2240 manual Duplex Mode Full duplex

Page 18

The Gigabit Ethernet module supports auto-negotiation although it only operates on 1000M full-duplex mode. This function makes sure the system operates with maximum performance when it is connected to an auto-negotiation capable Gigabit Ethernet device.

Duplex Mode	Full duplex
Fiber cable	MM 50/125mm, 62.5/125mm recommended

Module Installation

1.Turn off the power to the switch unit.

2.Open the cover of Gigabit slot.

3.Insert the module into slot until it is seated properly.

4. Screw the module onto the chassis securely.

-18-

Image 18

Contents 10/100 Fast Ethernet Switch With Gigabit Uplinks Installation GuideKS-2240 International Fax 886-2-26983873 Mail Kti@ktinet.com.tw Port Fast Ethernet Switch With Gigabit Uplinks Installation GuideTrademarks Table of Contents Introduction Features Igmp MIB Specifications Installing the Switch Packing ListPanels Gigabit Slot2Mounting the Switches Desktop MountingNetwork Switched Ports Making Network Connections10/100BASE-TX Fast Ethernet Switched Ports Switch can support connections to the following devices Manual Configuration10/100BASE-TX Fast Ethernet Ports Straight-through and Crossover UTP Cable Gigabit Ethernet Slots Module OutlineGigabit Ethernet Modules Top view Duplex Mode Full duplex Making Trunk Connections Page Virtual LAN Vlan Static Definitions of Vlan MembershipPage Interpretation LED IndicatorsLED Panels States and indications arePerforming Network Management Management SupportLogin Basic Management Activities Management objectsSetting IP Address Console Management Navigating Through the Console Interface To Press This KeyWeb Management Telnet ManagementSoftware Upgrade Snmp and Rmon ManagementSupport Contact your dealer for any new available software version