TroubleShooting
TroubleShooting |
|
|
|
|
|
Symptom | Possible Cause |
|
| Action | |
| Keyboard Not | Loose cables. | Check all keyboard cable | ||
| Responding 1 |
| connections to make sure they | ||
|
|
| are completely seated in their sockets. | ||
|
| Keyboard needs to | Unplug the keyboard from the Console | ||
|
| be reset. | Keyboard Port, then plug it back in. | ||
|
| Switch needs to be | Turn off the computers. Unplug the | ||
|
| reset | KVM cables. Wait five seconds; then | ||
|
|
| plug the cables back in and turn the | ||
|
|
| computers on. | ||
|
|
|
|
|
|
|
| Switch is in Auto Scan | Press the [Spacebar] to exit Auto Scan | ||
|
| Mode. | Mode. | ||
| Pressing Hot | Selected port | Resend the Hotkey command | ||
| Keys Gets No | connects to a | selecting a port that has a powered On | ||
| Response.2 | powered Off computer. | computer attached. | ||
|
| Hotkey sequence | Resend the Hotkey command - press | ||
|
| input incorrectly. | and release each key in the sequence | ||
|
|
| individually. | ||
|
|
|
|
|
|
|
| Switch is in Auto Scan | Press the [Spacebar] to exit Auto Scan | ||
|
| Mode. | Mode. | ||
| Mouse Not | Loose cables. | Check all mouse cable connections to | ||
| make sure they are completely seated | ||||
| Detected, or |
| |||
|
| in their sockets. | |||
| Does Not |
| |||
| Respond | Use of Mouse Port | This unit is designed to only work with | ||
| Correctly.2 | ||||
|
| Adapters | PS/2 mice and computers with PS/2 | ||
|
|
| type mouse ports. Serial mouse ports | ||
|
|
| with adapters cannot be used. | ||
|
|
|
|
|
|
|
| Mouse needs to be | Unplug the mouse from the Console | ||
|
| reset. | Mouse Port, then plug it back in. | ||
|
|
|
|
|
|
|
|
|
|
|
|
17