Operation

2. Press and release [0]

Once scanning begins, it continues until you press [Esc] or [Spacebar] to exit Auto Scan Mode. The Port that is active at the time scanning stops remains active.

Note:

1.Auto Scan only scans ports that are powered on. It passes over any powered off ports.

2.While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended. You must exit Auto Scan Mode by pressing [Esc] or [Spacebar] in order to regain normal control of their use.

3.Pressing [Esc] or [Spacebar] exits both Auto Scan Mode and Hotkey Mode.