Others

Before Requesting Repair (Problems and Solutions)

Playback (Sound)

1:Sound is not played back from the built-in speaker of the Camera Recorder or the headphones.

OIs the volume too low? During playback, keep pressing the [PUSH] Dial until the [VOLUME] Indication appears. Then, turn the [PUSH] Dial to adjust the volume. (-32-)

2:Different sounds are reproduced at the same time.

O[12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] Main- Menu has been set to [MIX]. As a result, the original sound and sound that was recorded by audio dubbing are played back together. It is possible to reproduce the sounds separately. (-38-)

3:The original sound was erased when audio dubbing was performed.

OIf you perform audio dubbing on a recording done in [16bit] Mode, the original sound will be erased. If you wish to preserve the original sound, be sure to select [12bit] Mode at the time of recording.

4:Sounds cannot be played back.

OAlthough a Cassette with no audio dubbing is being played, is [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] Main-Menu set to [ST2]? To play back a Cassette with no audio dubbing, [12bit AUDIO] must be set to [ST1]. (-38-)

OIs the Variable Speed Search Function working? Press the [1] Button to cancel the Variable Speed Search Function. (-33-)

51

Page 51
Image 51
Panasonic AG-DVG7P manual Different sounds are reproduced at the same time, Sounds cannot be played back