Panasonic AG-DVG7P manual $ To Adjust the Audio Level, To Cancel Audio Dubbing

VCR Mode

Audio Dubbing

You can add music or narration to the recorded Cassette.

OIf the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.)

OAudio Dubbing cannot be performed on a recording done in LP Mode. (-18-)

1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK] >> [IN/OUT].

W.B/SHUTTER/IRIS

> PUSH

VOL/JOG

MENU

B

2 Continuing the aforesaid setup, select [A.DUB INPUT] >> [MIC] or [AV IN].

OSet to [AV IN] when external device is used, and to [MIC] when an external or built-in microphone is used.

3 Switch the Camera Recorder over to the Still Playback Mode where you want to add new sound.

To Play Back the Sound Recorded by 12bit Audio Dubbing

Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [12bit AUDIO] >> [ST2] or [MIX].

ST1: It plays back only the original sound.

ST2: It plays back only the sound added by Audio Dubbing.

MIX: It plays back both the original sound and the sound added by Audio Dubbing simultaneously.

OFor other notes concerning this item, see -45-.

$ To Adjust the Audio Level

You can adjust the Audio Level for Audio Dubbing.

1 Set [VCR FUNCTIONS] >> [RECORDING SETUP] >> [AUDIO LEVEL] >> [YES].

W.B/SHUTTER/IRIS

> PUSH

VOL/JOG

MENU

B

OThe [AUDIO LEVEL SETUP] Menu appears.

2 Press the [PUSH] Dial > to select the [MNL (AGC, NO-AGC)].

4 Press the [A.DUB] Button i on the Remote					OThe Audio Level Meter appears.
Controller.					AUDIO LEVEL SETUP
MULTI/					MODE AUTO MNL	MNLŁ
	REC	A.DUB			(AGC)(NO–AGC)
P-IN-P			+
			– VOL	i	(dB) –30	0 +6Ł
					GAIN –––
C/REW	PLAY	FF/ B
STILL ADV	PAUSE STILL ADV			u
					PUSH MENU TO RETURN
INDEX	STOP	INDEX

5 To start Audio Dubbing, press the [;] Button u on the Remote Controller.

To Cancel Audio Dubbing

Press the [;] Button u on the Remote Controller. The Camera Recorder is in the Still Playback Mode

again.

To dub audio while listening to a pre-recorded sound

When pausing the audio dubbing, [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu is automatically set to [ST2] and you can check the pre- recorded sound. When a microphone is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [OUT].) When the line input is used, you can dub audio while listening to a pre- recorded sound from the speaker.

3 Turn the [PUSH] Dial > to increase or decrease the bars of the [GAIN] Indication.

W.B/SHUTTER/IRIS

> PUSH

VOL/JOG

OFor details, refer to the [MIC LEVEL ADJ.] on the [RECORDING SETUP] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu (-31-).

38