Installation

1.Plug your keyboard and mouse into the correct USB ports on the side of the switch. If using a wireless keyboard and mouse whose receiver has only one USB plug, make sure it is inserted into the keyboard port and not the mouse port.

2.Plug your monitor into the VGA port on the side of the switch.

3.Plug your powered speakers into the audio jack on the side of the switch.

4.Plug the extra KVM cables into the green ports on the back of the switch using the custom green connectors. (You may skip both or only one of these cables if only using two or three computers)

5.Plug the VGA, USB, and audio connections on each of the KVM cables into each of your computers.