IOGear GCL1816, GCL1808 manual F5 SKP

F5: SKP

F5: SKP

This function allows you to trigger Skip Mode. Simply press [F5] to activate skip mode. When you see a left and right arrow next to the port number as the image below, you can press the arrow keys to skip to different ports. (Skip Mode’s behavior depends on the setup that you chose in Scan-Skip Mode, please to F3 – SET for more detail about Scan-Skip Mode)

Function [←]

[→]

[↑]

[↓]

Description

Switch to the last accessible port

Switch to the next accessible port

Switch to the last accessible port*

Note: If you have cascaded your KVM, it will switch to the last accessible port from level 2 of the last port from level 1.

Switch to the next accessible port*

Note: If you have cascaded your KVM, it will switch to the next accessible port from level 2 of the next port from level 1.

54