IOGear GCL1808, GCL1816 manual Message will appear on the screen as below

Step 5

Now plug the power cord back to the power sock- et and turn the LCD KVM back on. This will restore the LCD KVM with the factory default settings.

Step 6

A message will appear on the screen as below

Step 7

Turn off the LCD KVM and unplug the power cord from the power socket, then remove the jumper and screw the rear top housing back to the LCD KVM.

Final Step

Plug the power cord back to the power socket, then turn the LCD KVM back on, then it will be ready to use again.

69