KTI Networks KG-500F manual Installing Mini-GBIC Transceiver

Page 9

Installing Mini-GBIC Transceiver

A typical mini-GBIC SFP transceiver is shown as follows:

To install a fiber transceiver into the SFP slot, the steps are:

1.Insert the fiber transceiver into the mini-GBIC SFP port. Normally, a bail is provided for every SFP transceiver. Hold the bail and make insertion.

2.Until the fiber transceiver is seated securely in the slot, place the bail in lock position.

The mini-GBIC SFP slot supports hot-plug installation even when the computer is powered and operating.

9

Image 9
Contents 1000Base-X Gigabit Ethernet PCI Adapter with SFP Support Installation GuideTrademarks CE Notice Introduction Adapter FeaturesModel Definitions SpecificationsAdapter with PCI standard bracket Board ComponentsComponents Description Adapter with PCI low-profile bracketInserting the Adapter into the PCI Slot Installing the AdapterInstalling Mini-GBIC Transceiver Connecting to the Network Network Driver Installation Installation for Windows SystemsInstallation for other Systems LED Indicators