CHAPTER 2 Installing Adapter for SAP R/3
%cd mnt_point
4To start the installer, enter:
%./setup
The Installer Welcome window appears.
5Got to step 3 of the main procedure.
3To initiate the installation process, click Next on the Installer Welcome window.
The Installer window appears.
4To specify an installation directory, choose one of the following: a To accept the default directory, click Next.
b To use a different directory, click Browse, select the directory, and click Next.
Note For optimum performance, install all Sybase and New Era of Network products into the same directory.
5To configure the repository, do one of the following:
a If your repository is running, the Select Products To Install window appears. Go to step 7.
b If you do not have a repository installed or it is installed on a remote machine, the Repository Information window appears. Go to step 6.
Note
You can verify whether the repository is running by doing one of the following:
On Windows, go to Task Manager > Processes. If dbsrv7.exe is listed as running, the repository is active.
On Unix, type ps
6In the Repository Information window, do one of the following:
•To install a new repository, go to step 6a.
•To use an existing repository, go to step 6b.
Installation Guide | 29 |