Rear Panel

8.High EQ Control (Treble)

This is an active equalization control that adjusts the high frequency. Clockwise rotation boosts high frequencies and counter-clockwise rotation provides a cut in high frequencies (±10 dB). EQ is flat at center detent.

9.EQ Bypass Switch

Selects the status of the EQ. When OUT the EQ controls are active. When IN the EQ controls are inactive and the EQ is flat.

10.Mute Bus Indicators

The red LEDs indicate the status of each mute bus. Each LED lights when its appropriate mute bus is activated.

11.Master Level Control

Controls the overall level of the system.

12.AC Power Receptacle

This receptacle is for the IEC line cord (included) that provides AC power to the unit.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly grounded.

13.Power Switch

This rocker switch applies mains power to the unit.