RAID Native SATA-150 4Ports PCI Host

This Manual for the Models of 4 Channels SATA RAID HBA:

Model A: Serial ATA RAID Internal 4 Ports

Model B: SATA RAID External 2 Port + Internal 2 Port

1. Introduction

This RAID Native SATA-150 4Ports PCI Host Adapter is a PCI to 4Ports Serial ATA host controller board. It provides a 32bit, 33/66 MHz PCI interface on the host side and dual, fully compliant Serial ATA ports on the device side to access SATA Hard disk drive.

The board can be used to upgrade your desktop computer to have 4Ports Serial ATA Channels and support RAID 0, RAID 1 and RAID 0+1 features. It accepts host commands through the PCI bus, processes them and transfers data between the host and Serial ATA devices. The board should be connected to SATA target device and will take the data, serialize it and output it for transmission over the SATA interface. The board can control four independent Serial ATA channels. Each channel has its own Serial ATA bus and will support one Serial ATA device.

The board supports Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s). It comes completely with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000 and XP.

RAID, Redundant Array of Independent Disks, greatly enhances two main areas of data storage: performance and data integrity. By using RAID 0, also known as Striping, performance of sustained data transfer rates is greatly enhanced by simultaneously writing data to 2, 3 or 4 drives. The second benefit of RAID is data redundancy. RAID 1, Mirroring, writes identical data on two drives or sets of drives, thus protecting the data from a disk failure. If, for any reason, one drive were to fail, your data is secure and available from the

- 1 -

SATA-150 specifications

Lindy SATA-150 is a high-performance storage solution designed for users seeking fast and reliable data transfer capabilities in their computing environments. This product is characterized by its adherence to the SATA II standard, which allows for transfer rates of up to 150 MB/s, making it an excellent choice for both consumer and professional applications. Its primary use is to connect hard drives and solid-state drives to a motherboard or host controller, enabling efficient data management and storage optimization.

One of the standout features of the Lindy SATA-150 is its backward compatibility with previous SATA standards, allowing seamless integration with older devices. This flexibility ensures that users can upgrade their systems without the need for replacing existing components, making it a cost-effective solution. Moreover, its simple plug-and-play design allows for straightforward installation, facilitating quick setup with minimal technical knowledge required.

The Lindy SATA-150 employs advanced technologies to enhance performance and reliability. It supports Native Command Queuing (NCQ), which optimizes disk access and improves overall data throughput. This feature is especially beneficial when the drive is dealing with multiple read and write requests, allowing for more efficient use of resources. Additionally, it includes robust hot-swapping capabilities, enabling users to replace drives while the system is running without interrupting operation—a critical feature for businesses that require consistent uptime.

In terms of build quality, the Lindy SATA-150 is designed with durability in mind. Its connectors are engineered to withstand wear and tear over time, ensuring a stable connection. Furthermore, the device is compatible with various operating systems, including Windows, macOS, and Linux, making it versatile for different user environments.

When discussing characteristics, the Lindy SATA-150 shines in data integrity as well. It supports features such as error correction and data recovery modes to protect against data loss, ensuring that users can trust their storage solutions. With an emphasis on speed, compatibility, and reliability, the Lindy SATA-150 has established itself as a dependable choice for individuals and businesses aiming to maximize their data storage capabilities. This product is particularly ideal for those looking to build, upgrade, or enhance their computer systems while maintaining optimal performance for a range of applications.