Lindy 70536 user manual

Page 9

standard PCI-to-PCI bridge', click 'Next'. Select 'Search for the best driver for your device [Recommended]' and click 'Next'.

3.Select 'Floppy disk drives' and click 'Next'.

4.When the wizard indicates that it found a driver for the device click 'Next'. Then click 'Finish' to exit the wizard.

5.The Hardware wizard will display that it found 'NEC USB Open Host Controller', click 'Next'.

6.Select 'Search for the best driver for your device (Recommended)' and click 'Next'.

7.Select 'Floppy disk drives'. And insert diskette driver into Floppy drive, and click 'Next'.

8.Select 'The Updated driver (Recommended)'. NEC USB Open Host Controller, and click 'Next'. Then click 'Next' to continue.

9.If display 'Insert Disk' (please insert the disk labeled windows 98 second Edition CD-ROM) and click OK, Then click 'Finish' to exit the wizard.

10.The Hardware wizard will display that it found 'NEC USB Open Host Controller', and click 'Next'.

11.Select 'Search for the best driver for your device (Recommended)'.

Click 'Next'.

12.Select 'Floppy disk drives' click 'Next', select 'The Updated driver (Recommended)' NEC USB Open Host Controller, and click 'Next'. Then click 'Next' to continue.

13.If display 'Insert Disk' (please insert the disk labeled windows 98 second Edition

CD-ROM) and click OK, then click 'Finish' to exit the wizard.

14.The Hardware wizard will display that it found 'PCI Universal serial Bus', and click 'Next'.

15.Select 'Search for the best driver for your device (Recommended)'. Click 'Next',

16.Select 'Floppy disk drives' and click 'Next', select 'The Updated driver (Recommended)' NEC PCI To USB Enhanced Host Controller, and click 'Next'.

17.When the wizard indicates that it found a driver for the device, click 'Next'. Then click

'Finish' to exit the wizard.

18.The Hardware Wizard will display that it found a 'PCI Raid Controller', click 'Next'.

19.Select 'Search for the best driver for your device [Recommended]' and click 'Next'.

20.Make sure the 'Floppy disk drives' checkbox is checked and click 'Next'. Then click 'Next' to continue.

21.System will go through the enumeration process and install the driver.

At the end of the process, click ' Finish' to complete the installation. Reboot the system if your Windows 98SE drive is connected on the

- 9 -

Image 9
Contents Lindy No Raid SATA-150+USB2.0 Combo Low Profile PCIIntroduction FeaturesPCI Interface High Speed Serial ATA InterfacePackage Contents What Is RAIDUSB Interface Disk Striping RAIDCreating Striped Sets RAID RAID Bios InstallationCreating Mirrored Sets RAID Disk Mirroring RAIDWindows 2000 /XP Fresh OS installation Software InstallationDeleting RAID Sets Rebuilding Mirrored SetsWindows 2000 installation Verifying The installation under Windows 2000 and XP Windows XP installationWindows 98 SE /ME Fresh OS installation Windows 98SE installationUSB Root Hub Page Verifying The installation under Windows 98SE and ME Windows ME installationGeneral