Lindy 42807v0 user manual English

Page 5

User Manual

English

7. Disconnect the SATA Data cable from the bridgeboard. Hold the base of the drive enclosure and pull the bridgeboard up to disconnect it.

8.Unscrew the four screws holding the drive tray in place and remove the drive tray.

9.Disconnect the Molex to SATA cable and then replace the drive tray and insert the screws.

10.Attach the provided IDE ribbon cable and to the main board, in place of the bridge board.

11.Place the hard drive into the drive tray and connect the Molex power and IDE data cables

4

Image 5
Contents Sata & IDE Page Package Contents FeaturesEnglish IntroductionHardware Assembly English English Using the enclosure with your Mac Dismounting the drive Windows 2000/XP/Vista users Using the enclosure with your PCWindows Me users Safely Removing the DriveCE Statement CE/FCC InformationFCC Statement FCC WarningFrance Recycling Information