Lindy 25131 user manual Hardware Connection Computer

Page 11

2.3 Hardware Connection – Computer

For those computers you wish to be networked by Ethernet Powerline Adaptor, each of the computer must be properly connected with an Ethernet Powerline Adaptor through an Ethernet (RJ-45) cable.

Following are the steps to properly connect the Ethernet Powerline Adaptor to your computer:

1.Power off your PC or Notebook.

2.Connect the provided Ethernet (RJ-45) cable to the Ethernet Powerline Adaptor’s Ethernet port.

3.Connect the other end of the Ethernet (RJ-45) cable to you computer’s LAN port.

4.Plug the Ethernet Powerline Adaptor into a wall socket next to the computer.

5.Turn on your computer.

6.Check and confirm that the Power and Ethernet LEDs on the Ethernet Powerline Adaptor are ON.

The hardware connection mechanism is shown below:

Ethernet Powerline Adaptor

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Ethernet Powerline Adaptor Trademarks CopyrightFCC & CE Compliance Statement FCC Radiation NormCE Radiation Norm Contents Introduction „ Homeplug Turbo FeaturesPacket Contents Introduction Connecting MechanismLED Indicator Interface Description Physical InterfaceHardware Connection Computer Hardware Connection Internet Installing Management Utility Ethernet Powerline Adaptor Using The Management Utility Main Ethernet Powerline Adaptor Rename Enter Password Add Device HomePlug PrivacyEthernet Powerline Adaptor Diagnostics Ethernet Powerline Adaptor About Power LED does not light up. Ans. Check the following Appendix a Troubleshooting Guide
Top Page Image Contents