Kramer Electronics user manual Connecting the VS-88HN 8x8 Hdmi Matrix Switcher

5Connecting the VS-88HN 8x8 HDMI Matrix Switcher

i

Always switch off the power to each device before connecting it to your VS-88HN. After connecting your VS-88HN, connect its power and then switch on the power to each device.

To connect the VS-88HN 8x8 HDMI Matrix Switcher as illustrated in the example in Figure 3:

1.Connect up to eight HDMI sources (for example, DVD players) to the IN

HDMI connectors.

You do not have to connect all the sources.

2.Connect the eight OUT HDMI connectors to up to eight HDMI acceptors (for

example, LCD displays with built-in speakers).

You do not have to connect all the outputs.

3.If required, connect a PC/controller to the RS-232 port (see Section 6.6) and/or the Ethernet port (see Section 6.7).

4.Connect the device to the mains electricity (not shown in Figure 3).

5.If necessary, acquire the EDID (see Section 6.2)

VS-88HN - Connecting the VS-88HN 8x8 HDMI Matrix Switcher 9