Linksys WPSM54G manual Print Server Settings, Diagnostic, Close

Chapter 2

How to Use the PrintServer

Print Server Settings

This section shows you the PrintServer’s settings, which were configured during the Setup Wizard.

If you will use the PrintServer’s web-based utility, write down the IP address of the PrintServer. You will need it to access the web-based utility.

Diagnostic

To run the wizard that sets up the PrintServer driver, click the Diagnostic button. Refer to the Quick Installation for details.

Close

To exit the Print Server Information screen, click the Close button.

To change the PrintServer’s advanced settings, use the web-based utility. For more information, refer to “Chapter 3: Advanced Configuration”.

Wireless-G PrintServer 5