Kramer Electronics VP-81 K user manual Before Installing in a Rack

Page 11

4 Installing in a Rack

This section provides instructions for rack mounting the unit.

Before Installing in a Rack

Before installing in a rack, be sure that the environment is within the recommended range:

OPERATING TEMPERATURE:

0º to +55ºC (32º to 131ºF)

STORAGE TEMPERATURE:

-45º to +72ºC (-49º to 162ºF)

HUMIDITY:

10% to 90%, RHL non-condensing

!CAUTION!

When installing on a 19" rack, avoid hazards by taking care that:

1. It is located within the recommended environmental conditions, as the operating ambient temperature of a closed or multi unit rack assembly may exceed the room ambient temperature.

2. Once rack mounted, enough air will still flow around the machine.

3. The machine is placed straight in the correct horizontal position.

4. You do not overload the circuit(s). When connecting the machine to the supply circuit, overloading the circuits might have a detrimental effect on overcurrent protection and supply wiring. Refer to the appropriate nameplate ratings for information. For example, for fuse replacement, see the value printed on the product label.

5. The machine is earthed (grounded) in a reliable way and is connected only to an electricity socket with grounding. Pay particular attention to situations where electricity is supplied indirectly (when the power cord is not plugged directly into the socket in the wall), for example, when using an extension cable or a power strip, and that you use only the power cord that is supplied with the machine.

How to Rack Mount

To rack-mount a machine:

1. Attach both ear brackets to the machine. To do so, remove the screws from each side of the machine (3 on each side), and replace those screws through the ear brackets.

2.Place the ears of the machine against the rack rails, and insert the proper screws (not provided) through each of the four holes in the rack ears.

Note:

 In some models, the front panel

may feature built-in rack ears

 Detachable rack ears can be removed for desktop use

 Always mount the machine in the rack before you attach any cables or connect the machine to the power

 If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user manual for installation instructions available from: http://www.kramerelectronics.com)

8

VP-81K - Installing in a Rack

Image 11
Contents VP-81K Page Figures Introduction Achieving the Best Performance Getting StartedOverview Defining Edid Defining the VP-81K 8x1 UXGA/Audio SwitcherDDC Support Audio Gain PROG. Button Using the IR Transmitter Before Installing in a Rack Installing in a RackConnecting the VP-81K Connecting the VP-81K Connecting the Balanced/Unbalanced Stereo Audio OutputCrossed Cable RS-232 Connection Controlling via RS-232Controlling the VP-81K via the Ethernet Port Connecting a PC or Controller to the RS-485 PortRight-click Local Area Connection Properties Configuring the Ethernet Port Connecting via a Straight-Through CableClick OK P3K Wizard screen appears Controlling via the Embedded Web PagesClick the on-screen buttons to control the unit Click Configurations Cascading Machines DIP-Switch SettingsSetting the Machine # Control Configuration via RS-232 and RS-485 Using the Regular or Automatic Switching Mode Operating Your VP-81K 8x1 UXGA/Audio SwitcherUsing the Front Panel Input Selector Buttons Automatic Switching Mode Using the Audio-Follow-Video/Breakaway ModesRegular Switching Mode Operating in the Audio-Follow-Video Mode Setting the Audio GainOperating in Breakaway Mode Toggling between Video and Audio Control in Breakaway ModeInputs Technical SpecificationsRS-232 Communication ParametersTable of Ascii Codes for Serial Communication Protocol Table of Hex Codes for Serial Communication Protocol 16 81 80 36dB 16 81 C8 0dB 16 81 D4 +6dB Kramer Protocol Switching ProtocolsSwitching Protocols via the Front Panel Buttons Switching Protocols via Protocol CommandsProtocol 3000 Syntax Kramer Protocol#CR ~OK Crlf Command Part DetailsAUD? AUDVID? VIDPRST-STO SIGNAL?Signal Input PresetLOCK-MODE Reset Reset OKLOCK-FP LOCK-FP?NAME? Name SN?VERSION? Version NameAFV? AFVMachine Number MSB LSBInput OutputReset Video Switch Video VP-81K Kramer Protocol VP-81K Kramer Protocol Only the first purchase customer may enforce this warranty Safety Warning

VP-81 K specifications

Kramer Electronics has established itself as a leading provider of innovative audio-visual solutions, and the VP-81 K is a noteworthy addition to their product lineup. This versatile presentation switcher is designed to accommodate a variety of audiovisual applications, making it ideal for classrooms, conference rooms, and professional events.

One of the standout features of the VP-81 K is its ability to handle multiple video formats. It supports both analog and digital inputs, including HDMI, VGA, and Composite video. This flexibility allows users to connect a wide range of devices, from laptops and projectors to higher-end sources and displays. The device seamlessly switches between input sources, ensuring a smooth presentation experience without interruption.

Another important characteristic of the VP-81 K is its built-in scaling technology. The device is equipped with a high-quality scaler that ensures output resolutions are optimized for a range of display formats. This means that regardless of the source resolution, the image quality remains crisp and clear, providing optimal viewing experiences for audiences.

The VP-81 K also boasts advanced audio capabilities. It allows for audio embedding and de-embedding, making it possible for users to manage both audio and video signals from a single device. This feature is particularly useful in settings where high-quality sound is essential, allowing for easier integration with external audio systems.

In terms of control, the VP-81 K is user-friendly. It provides multiple controlling options, including front-panel buttons, remote control, and RS-232 for integration with third-party systems. This flexibility ensures that users can easily manage their presentations, regardless of their technical expertise.

For enhanced security and performance, the VP-81 K features robust signal processing technology. It maintains signal integrity over long cable runs, ensuring that presentations remain professional and reliable. Additionally, the device is designed with durability in mind, utilizing high-quality components that withstand the rigors of frequent use.

Overall, the Kramer Electronics VP-81 K is a powerful and adaptable presentation switcher, equipped with essential features and cutting-edge technologies that cater to modern audiovisual needs. Whether in educational settings or corporate environments, its capabilities are sure to elevate any presentation experience.