Kramer Electronics VP-81 K user manual Figures

Contents

1	Introduction	1
2	Getting Started	2
2.1	Achieving the Best Performance	2
3	Overview	3
3.1	DDC Support	4
3.2	Defining EDID	4
3.3	Defining the VP-81K 8x1 UXGA/Audio Switcher	4
3.4	Using the IR Transmitter	7
4	Installing in a Rack	8
5	Connecting the VP-81K	9
5.1	Connecting the Balanced/Unbalanced Stereo Audio Output	10
5.2	Controlling via RS-232	11
5.3	Connecting a PC or Controller to the RS-485 Port	12
5.4	Controlling the VP-81K via the Ethernet Port	12
5.5	DIP-Switch Settings	18
5.6	Cascading Machines	18
6	Operating Your VP-81K 8x1 UXGA/Audio Switcher	20
6.1	Using the Front Panel Input Selector Buttons	20
6.2	Using the Regular or Automatic Switching Mode	20
6.3	Using the Audio-Follow-Video/Breakaway Modes	21
6.4	Setting the Audio Gain	22
7	Technical Specifications	23
8	Communication Parameters	24
9	Table of ASCII Codes for Serial Communication (Protocol 3000)	25
10	Table of Hex Codes for Serial Communication (Protocol 2000)	26
11	Kramer Protocol	28
11.1	Switching Protocols	28
11.2	Kramer Protocol 3000	29
11.3	Kramer Protocol 2000	36

Figures

Figure 1: VP-81K 8x1 UXGA/Audio Switcher Front Panel	5
Figure 2: VP-81K 8x1 UXGA/Audio Switcher Rear Panel	6
Figure 3: Connecting the VP-81K	10
Figure 4: Connecting an Balanced Stereo Audio Output	10
Figure 5: Connecting an Unbalanced Output	10
Figure 6: Crossed Cable RS-232 Connection	11
Figure 7: Straight Cable RS-232 Connection with a Null Modem Adapter	11
Figure 8: Local Area Connection Properties Window	13
Figure 9: Internet Protocol (TCP/IP) Properties Window	13
Figure 10: Connect Screen	14
Figure 11: Device Properties Screen	15
Figure 12: HOME Embedded Web Page	16
Figure 13: CONFIGURATIONS Embedded Web Page	17
Figure 14: SETUP DIP-Switches	18
Figure 15: Control Configuration via RS-232 and RS-485	19
VP-81K – Contents	i