Elo TouchSystems LCD manual Regulatory Information, Electrical Safety Information

Page 58

REGULATORY INFORMATION

I. Electrical Safety Information:

A)Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.

B)There are no operator serviceable parts inside this equipment. There are hazard- ous voltages generated by this equipment which constitute a safety hazard. Service should be provided only by a qualified service technician.

C)This equipment is provided with a detachable power cord which has an integral safety ground wire and 3-prong connector intended for connection to a grounded safety outlet.

1)Do not substitute the cord with other than the provided approved type. Under no circumstances use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.

2)The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.

3)Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to mains power.

II.Emissions and Immunity Information

A)Notice to Users in the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

B)Notice to Users in Canada: This equipment complies with the Class B limits for radio noise emissions from digital apparatus as established by the Radio Interfer- ence Regulations of Industrie Canada.

C)Notice to Users in the European Union: Use only the provided power cords and interconnecting cabling provided with the equipment. Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards:

This Information Technology Equipment (ITE) is required to have a CE Mark on the manufacturer’s label which means that the equipment has been tested to the following Directives and Standards:

53

Image 58
Contents Page #$% +++ Copyright 2003 Elo TouchSystems Inc. All Rights Reserved Page Table of Contents Introduction PrecautionsAbout the Product Page Installation and Setup Unpacking Your TouchmonitorProduct Overview 1545L Product Overview 1547L/1548L/1549L Rear View Side View Product Overview 1567L Side View Attaching the L-Brackets Touch Interface Connection Serial ConnectionConnecting the Video Cable Connecting the Serial Touchscreen Cable Connect the Remote OSD Cable Connecting the Power Cable USB Connection Video cable Video port Connecting the USB Touchscreen Cable Connecting the Remote OSD Cable Power cable Optimizing the LCD Display Vesa Mount on Your TouchmonitorInstalling the Driver Software Page Installing the Serial Touch Driver for MS-DOS and Windows Installing the USB Touch Driver Installing the USB Touch Driver for Windows 98 and WindowsUsing the On-Screen Display Menus About Touchmonitor AdjustmentsOperation Menu OSD Menu Function ContrastPage Troubleshooting Solutions to Common ProblemsPage Native Resolution Input Video 15 LCDPage Touchmonitor Safety Care and Handling of Your Touchmonitor Technical Specifications Compatibility ModesTouchmonitor Specifications ET1545L/1547L/1548L/1567L Touchmonitor Specifications ET1549L Force Surface Durability Expected Life Performance Sealing Force Surface Durability Expected Life Performance LCD Touchmonitor Dimensions ET1547L/1548L/1549L #%0 +*+ ET1547L Rackmount Page ET1567L Page Cut Out Dimensions ET1545L Front Mount Cut Out+*4 ##%0 %&56 Vertical Attachment Without Brackets ET1567L Front Mount Plate Cut Out Electrical Safety Information Regulatory InformationPage Page Page Warranty Page Index Remote OSD Buttons