Regulatory Information

Electrical Safety Information

A)Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation or damage to the equipment, or may pose a fire hazard if the limitations are exceeded.

B)There are no operator serviceable parts inside this equipment. This equipment generates hazardous voltages that constitute a safety hazard. Service should be provided only by a qualified service technician.

C)This equipment is provided with a detachable power cord that has an integral safety ground wire and three-prong connector intended for connection to a grounded safety outlet.

1)Do not substitute the cord with any cord other than the provided approved type. Under no circumstances use an adapter plug to connect to a two-wire outlet, as this will defeat the continuity of the grounding wire.

2)This equipment requires the use of the ground wire as a part of its safety certification. Modification or misuse can provide a shock hazard that can result in serious injury or death.

3)If there are any questions about the installation prior to connecting the equipment to mains power, contact a qualified electrician or the manufacturer.

Emissions and Immunity Information

A)Notice to Users in the United States: This equipment has been tested and found to comply with Part 15 Class B of FCC Rules for digital devices. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

B)Notice to Users in Canada: This equipment has been tested and found to comply with Class B radio noise emission limits as established by the Radio Interference Regulations of Industrie Canada for digital devices.

C)Notice to Users in the European Union: This equipment has been tested and found to comply with the Class B requirements of CE marking for Information Technology Equipment as required by: Low Voltage Directive 73/23/ECC and standard EN 60950; EMC Directive 89/336/ECC, and per standard EN 55022.

D)General Information to All Users: This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to this manual, the equipment may cause interference with radio and television communications. There is, however, no guarantee that interference will not occur in any particular installation due to site-specific factors.

ET1X45C-4UWE-1, ET1X45C-4SWE-1 specifications

Elo TouchSystems has introduced the ET1X45C-4UWE-1 and ET1X45C-4SWE-1, two cutting-edge touch screen monitors designed for a variety of applications, including retail, hospitality, and interactive kiosks. These models embody Elo’s commitment to delivering high-quality touch technology, offering enhanced user experience and robust reliability.

One of the standout features of the ET1X45C series is its advanced touch technology. Both models utilize Elo’s proprietary IntelliTouch technology, ensuring a highly responsive touch experience. This technology allows for the detection of multiple touch points, making it ideal for interactive applications where quick and accurate responses are essential. With a projected capacitive touch interface, users can enjoy a smooth and intuitive interaction with the screen.

Both models in the ET1X45C series come equipped with a Full HD resolution of 1920x1080 pixels, providing crystal-clear image quality. This high resolution ensures that images, videos, and graphics are displayed with vivid clarity, which is crucial for engaging consumers and delivering immersive experiences. Additionally, the displays offer wide viewing angles, ensuring that content is visible from various perspectives, a valuable feature for installations in high-traffic areas.

In terms of build quality, the ET1X45C models feature a durable design that can withstand the rigors of everyday use. The screens are built with scratch-resistant glass, making them suitable for environments where they may be exposed to physical contact. Furthermore, they are rated for spill resistance, allowing them to endure accidental splashes or spills, which is particularly advantageous in food service or retail applications.

The ET1X45C-4UWE-1 model is designed with a USB interface, making it easy to connect to various devices, while the ET1X45C-4SWE-1 comes with an additional serial port for legacy device compatibility. This versatility allows businesses to integrate these touch screens into existing systems with ease, facilitating a seamless transition.

Power efficiency is another key characteristic of the ET1X45C series. These monitors consume low power, which not only reduces energy costs but also contributes to a smaller carbon footprint, aligning with the growing emphasis on sustainability.

In summary, the Elo TouchSystems ET1X45C-4UWE-1 and ET1X45C-4SWE-1 touch screen monitors stand out with their advanced touch technologies, high-resolution displays, durability, and versatility. These features make them ideal for a wide range of applications, enhancing user engagement and operational efficiency.