Regulatory Information

Electrical Safety Information

A)Compliance is required with respect to the voltage, frequency, and current requirements indi- cated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation or damage to the equipment, or may pose a fire hazard if the limitations are exceeded.

B)There are no operator serviceable parts inside this equipment. This equipment generates haz- ardous voltages that constitute a safety hazard. Service should be provided only by a qualified service technician.

C)This equipment is provided with a detachable power cord that has an integral safety ground wire and three-prong connector intended for connection to a grounded safety outlet.

1)Do not substitute the cord with any cord other than the provided approved type. Under no circumstances use an adapter plug to connect to a two-wire outlet, as this will defeat the continuity of the grounding wire.

2)This equipment requires the use of the ground wire as a part of its safety certification. Modification or misuse can provide a shock hazard that can result in serious injury or death.

3)If there are any questions about the installation prior to connecting the equipment to mains power, contact a qualified electrician or the manufacturer.

Emissions and Immunity Information

A)Notice to Users in the United States: This equipment has been tested and found to comply with Part 15 of FCC Rules for digital devices. Models with internal touch controllers meet Class B limits. Models without internal touch controllers meet Class A limits. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations.

B)Notice to Users in Canada: This equipment has been tested and found to comply with radio noise emission limits as established by the Radio Interference Regulations of Industrie Canada for digital devices. Models with internal touch controllers meet Class B limits. Models without internal touch controllers meet Class A limits.

C)Notice to Users in the European Union: This equipment has been tested and found to comply with the requirements of CE marking for Information Technology Equipment as required by: Low Voltage Directive 73/23/ECC and standard EN 60950; EMC Directive 89/336/ECC, and per standard EN 55022, models with internal touch controllers meet Class B limits, and models without internal touch controllers meet Class A limits.

D)General Information to All Users: This equipment generates, uses, and can radiate radio fre- quency energy. If not installed and used according to this manual, the equipment may cause interference with radio and television communications. There is, however, no guarantee that interference will not occur in any particular installation due to site-specific factors.

1)In order to meet emission and immunity requirements, the user must observe the fol- lowing:

a)Use only the provided I/O cables to connect this digital device with any computer.

Elo Entuitive Touchmonitor

CRT Rear Mount User Guide - 39

ET1545C, ET1745C specifications

Elo TouchSystems has established itself as a leader in touch technology with its innovative range of touchscreens, including the ET1545C and ET1745C models. These interactive displays cater to various industries, making them ideal for retail, hospitality, gaming, and education. Both models deliver exceptional performance, user-friendly interfaces, and a sleek design.

The ET1545C features a 15-inch screen, while the ET1745C boasts a larger 17-inch display. Both screens utilize Elo's advanced touch technology, offering users exceptional responsiveness and accuracy. The displays are available with either a projected capacitive or an analog resistive touch option. The projected capacitive technology supports multi-touch capabilities, allowing for intuitive gestures such as pinch-to-zoom and swipe, which enhance the user experience.

One of the standout characteristics of the ET1545C and ET1745C is their impressive brightness levels, which enhance visibility in high ambient light conditions. This makes the touchscreens suitable for diverse settings, whether positioned in bright retail spaces or bustling restaurants. Additionally, both models feature a durable glass surface that resists scratches and smudges, ensuring longevity and maintaining a professional appearance.

Performance-wise, the ET1545C and ET1745C are equipped with a USB interface that simplifies connectivity with various devices, including PCs and embedded systems. This plug-and-play capability allows for easy setup and integration, making them versatile solutions for businesses seeking efficient touch interfaces.

Furthermore, Elo TouchSystems has ingeniously designed these monitors with adjustable ergonomics, including the ability to tilt and rotate, providing users with comfort while interacting with the screen. The devices also include VESA mounting compatibility, enabling flexibility in installation options.

Software compatibility is a vital aspect for modern display solutions, and both models are designed to work seamlessly with various operating systems, including Windows, Linux, and Android. This comprehensive support ensures businesses can implement them in numerous applications without worrying about compatibility issues.

In summary, the Elo TouchSystems ET1545C and ET1745C touchscreens stand out due to their impressive features, robust technologies, and elegant designs. Whether for point-of-sale systems, interactive kiosks, or customer service applications, these models provide a reliable and engaging solution that enhances the user experience while offering businesses a competitive edge in their respective markets.