Touch Interface Connection
NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off.
1Connect one end of the power adapter to the monitor and the other end to the connector of the power cord.
2Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding.
3Connect one end of the touchscreen (RS232) cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. (optional module)
4Press the power button on rear panel to turn the monitor power on.