Elo TouchSystems 1847L manual Regulatory Information

Page 44

REGULATORY INFORMATION

I. Electrical Safety Information:

A)Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.

B)There are no operator serviceable parts inside this equipment. There are hazard- ous voltages generated by this equipment which constitute a safety hazard. Service should be provided only by a qualified service technician.

C)This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.

1)Do not substitute the cord with other than the provided approved type. Under no circumstances use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.

2)The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.

3)Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment to mains power.

II.Emissions and Immunity Information

A)Notice to Users in the United States: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

B)Notice to Users in Canada: This equipment complies with the Class B limits for radio noise emissions from digital apparatus as established by the Radio Interfer- ence Regulations of Industrie Canada.

C)Notice to Users in the European Union: Use only the provided power cords and interconnecting cabling provided with the equipment. Substitution of provided cords and cabling may compromise electrical safety or CE Mark Certification for emissions or immunity as required by the following standards:

39

Image 44
Contents Elo Entuitive Touchmonitor User Guide Elo Entuitive Touchmonitor User Guide Copyright 2003 Elo TouchSystems Inc. All Rights Reserved Page Table of Contents Precautions About the ProductPage Installation and Setup Unpacking Your TouchmonitorProduct Overview Attaching the L-Brackets Panel Cut Outs TOP1847L Option 1847L Option 1847L with 819602-000 Option Top Touch Interface Connection Serial or USB ConnectionConnecting the Video Cable Connecting the Serial or USB Touchscreen Cable Connecting the OSD Remote Cable Connecting the Power Cable Optimizing the LCD Display Vesa Mount on Your TouchmonitorVesa Mounting Interface Installing the Driver Software Installing the Serial Touch Driver Installing the Serial Touch Driver for MS-DOS and Windows Page Page About Touchmonitor Adjustments Using the On-Screen Display OSD MenusRemote OSD Buttons Control FunctionOSD Menu Function Auto ContrastSaturation HUE Flesh Tone Troubleshooting Solutions to Common ProblemsPage Native Resolution Page Touchmonitor Safety Care and Handling of Your Touchmonitor Technical Specifications Compatible Video ModesTouchmonitor Specifications Optical Electrostatic Positional Accuracy Side View Regulatory Information Page CE230760 US Important Safety Instructions Warranty Page Index D e x 4 Check out Elos Web site