Attention, consult accompanying documents with respect to electric Shock, fire and mechanical hazard only in according with
Manufacturing
Elo TouchSystems Inc.
6500 Kaiser Dr. Fremont, CA 94555 U.S.A.
Rating:
LCD Monitor Input Rating: 12Vdc, 4A
adapter Chi Sam Electronic Enterprise Co., Ltd. Type
Classification
1.Protection against electric shock (5.1, 5.2) Class I equipment, no applied parts
2.Protection against harmful ingress of water (5.3) Ordinary Equipment (IPXO)
3.Degree of safety in the presence of a flammable anesthetics mixture with air or with oxygen or with nitrous oxide (5.5)
Not suitable for use in the presence of a flammable anesthetics mixture with air or with oxygen or with nitrous oxide.
4.Model of operation (5.6) Continuous
Explanation Symbol
1. : DC Current
2. : ON/ OFF switch
Important Safety Instructions
Model:
1.Read the Safety Instruction carefully and keep it for use later.
2.Be aware of all warning and instruction signs marked on the products.
3.When cleaning, cut off the electrical supply at all times, Never use liquid or Aerosol detergent, use a damp rag instead.
4.The LCD Monitor shall be operated according the following specification.
5.The adapter can be operated at an ambient temperature 10~40 C,RH 10%~90% maximum.
6.The adapter shall be operated in dry locations to protect from moisture.
7.Keep this product stable at any time. Otherwise the product may fall, hazarding the safety and causing serious damage.
8.Do not clog apertures on the product's coating required for ventilation purpose.
Do not install this product in built_in installation without proper ventilation system. Always keep this product away from all kinds of heat sources.
9.The power source used for this product must match one marked on the product's label. Please consult your dealer or local technician if you have any doubt.
10.In order to avoid the electric shock hazard in use, a
11.Do not lay the power cord on the pathway or rest anything heavy on it
12.Check the current flow tolerance of an extension cord before use, make sure that the total amount of the product's current flow does not exceed the limit. A current flow of a wall outlet can never exceed up to 15 amperes.
13.Do not insert objects or pour liquid into this product through it's casting apertures. It may touch a high voltage area causing electric shock or short the circuit.
14.Compliance with IEC EN
15.Transportation temperature/humidity:
16.The LCD Monitor Model
17.For repair of equipment parts designated by the manufacturer as repairable provided.
42 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e