Elo TouchSystems 1717L, 1517L user manual Osd

Using the OSD buttons controls an on-screen graphical user interface which displays on top of your input video, allowing intuitive adjustment of the following display parameters:

Parameter	Available Adjustment
Brightness	Increase/decrease monitor brightness.
	Default: maximum
Contrast	Increase/decrease monitor contrast.
	Default: best gray-shade performance
Clock	Allows fine adjustments of the panel’s pixel dot clock.
Phase	Allows fine adjustments of the panel’s pixel dot clock phase.
Auto Adjust	Automatically adjusts the system clock to the input analog VGA video signal, affecting
	the H-position, V-position, Clock, and Phase menu items.
H-position	Moves the image horizontally on the display in single-pixel increments.
	Default: centered.
V-position	Moves the image vertically on the display in single-pixel increments.
	Default: centered.
	Switches the scaling method between Full Scaling and Maintain Aspect Ratio.
	Default: Full Scaling
	Full Scaling – scales the X- and Y-dimensions of the input video (up or down as
	needed) to the display’s native resolution.
Aspect Ratio	Fill To Aspect Ratio – Assuming a landscape orientation and an input video with aspect
	ratio smaller than 1024 x 768 for the 15 inch or 1280 x 1024 for the 17 inch, scales the
	Y-dimension of the input video (up or down as needed) to the display’s Y-resolution,
	and scales the X-dimension to maintain the input video’s aspect ratio (and fills the rest
	of the display with equal black bars on the left and right).
	The touchscreen may need recalibration when switching between Aspect Ratio
	options.
Sharpness	Adjusts sharpness of the displayed images.
	Default: no sharpness adjustment
	Only applicable at non-native input video resolutions
	Selects the display’s color temperature. The available color temperatures are 9300K,
Color	7500K, 6500K, 5500K, and User Defined. If the User Defined option is selected, the
	user can change the color temperature by changing individual R, G, and B gains on a
Temperature
	scale from 0 to 100.
	Default: User Defined with R, G, and B all set to 100.
OSD Timeout	Adjusts how long a period of OSD button inactivity the touchmonitor will wait before
	closing the OSD. The adjustable range is between 5 and 60 seconds.
	Default: 15 seconds
OSD	Selects which language the OSD information is displayed in. The available languages
	are: English, French, Italian, German, Spanish, Simplified Chinese, Traditional
Language	Chinese, and Japanese.
	Default: English.
Recall	Selecting “Recall Defaults” restores all factory default settings for OSD-adjustable
Defaults	parameters (except OSD Language) and for Preset Video Mode timings.

User Manual: 1517L, 1717L

SW601708 Rev A, Page 16 of 27