Elo TouchSystems 1522L manual IntelliTouch Touchscreen Specifications

Page 41

IntelliTouch Touchscreen Specifications

Mechanical

 

Positional Accuracy

Standard deviation of error is less than 0.080 in. (2.03 mm).

 

Equates to less than ±1%.

Touchpoint Density

More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).

Touch Activation Force

Typically less than 3 ounces (85 grams).

Surface Durability

Surface durability is that of glass, Mohs’ hardness rating of 7.

Expected Life Performance

No known wear-out mechanism, as there are no layers, coatings,

 

or moving parts. IntelliTouch technology has been operationally

 

tested to more than 50 million touches in one location without

 

failure, using a stylus similar to a finger.

Sealing

Unit is sealed to protect against splashed liquids, dirt, and dust.

Optical

 

Light Transmission (per ASTM

92%

D1003)

 

Visual Resolution

All measurements made using USAF 1951 Resolution Chart,

 

under 30X magnification, with test unit located approximately

 

1.5 in (38 mm) from surface of resolution chart.

 

Clear surface: Excellent, with no noticeable degradation.

 

Antiglare surface: 6:1 minimum.

Gloss (per ASTM D2457

 

using a 60-degree gloss meter)

Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss

 

units.

Environmental

 

Chemical Resistance

The active area of the touchscreen is resistant to all chemicals

 

that do not affect glass, such as:

 

Acetone

 

Toluene

 

Methyl ethyl ketone

 

Isopropyl alcohol

 

Methyl alcohol

 

Ethyl acetate

 

Ammonia-based glass cleaners

 

Gasoline

 

Kerosene

 

Vinegar

Electrostatic Protection (per

Meets Levels 4 (15kV air/8 kV contact discharge)

EN 61 000-4-2, 1995)

 

 

 

C-35

Image 41
Contents Elo Touchmonitor User Guide E212991 Elo TouchSystems 1522L-XXWB Series Revision aDisclaimer Table of Contents Appendix C Page Product Description IntroductionTFT LCD Display Panel Detailed LCD Display Performance RequirementsMagnetic Stripe Reader External Power Supply Elo Touchmonitor User Guide Unpacking Your Touchmonitor Installation and SetupProduct Overview Side View Base Bottom View KensingtonTM Lock Remove the Cable Cover USB Interface ConnectionElo Touchmonitor User Guide Page Replace the Cable Cover Testing the USB MSR Keyboard Emulation Installing the Peripheral Device DriversTesting the USB-HID Class MSR Optimizing the LCD DisplayConvert MSR from HID to keyboard emulation MSR Conversion To convert from HID to Keyboard Emulation ModePage Elo Touchmonitor User Guide Page Installing APR USB Touch Driver for Windows XP Installing the Touch Driver SoftwareClick Start Run Elo Touchmonitor User Guide Operation About Touchmonitor AdjustmentsMenu Menu display and menu exit LCD Function KeyOn the screen Power Lock/Unlock Controls and AdjustmentOSD Lock/Unlock OSD Menu FunctionsAuto Adjust PhaseColor Temperature Recall DefaultsDisplay Angle Power-Save No InputPower LED Display & Power Saving General Power Saving Mode Page Solutions to Common Problems TroubleshootingElo Touchmonitor User Guide Input Video 15.0 LCD Native Resolution640 x 800 xElo Touchmonitor User Guide Touchmonitor Safety Care and Handling of Your Touchmonitor Display Modes Technical SpecificationsResolution Type ScanKHz ScanHz Pol Touchmonitor Specifications IntelliTouch Touchscreen Specifications CarrollTouch Infrared Touchscreen Specifications Resolution Accuracy Acoustic Pulse Recognition SpecificationsElectrical Position Accuracy Expected LifeAccuTouch Touchmonitor Specifications Surface Capacitive Touchscreen Specifications LCD Touchmonitor1522L-XXXB-1-XX-G Dimensions II. Emissions and Immunity Information Regulatory InformationElo Touchmonitor User Guide 6K70 E141667 ITE Elo Touchmonitor User Guide Warranty Elo Touchmonitor User Guide Index D E X Check out Elo’s Web site