Displaying the picture
1. Activate your signal source. Turn the signal source on, and make it send the signal to
the projector.
2. Use the VOLUME + / VOLUME - buttons to adjust the volume.
To have the projector silent, press the MUTE button on the remote control.
3. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn.
You can also use the remote control to select an input signal. Press the VIDEO button for selecting an input signal from the HDMI,
4. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect
ratio in turn.
5. Usesize.the zoom ring to adjust the screen
6. Use the focus ring to focus the picture.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY | FREEZE | PAGE | VOLUME | VOLUME+ button |
ON |
| UP |
|
|
|
|
| VOLUME- button | |
OFF |
| DOWN |
| |
|
|
| MUTE button | |
KEYSTONE | MY BUTTON | MUTE | ||
| 1 | 2 |
|
|
POSITION |
|
| MENU |
|
| ENTER |
|
| |
ESC |
|
| RESET |
|
INPUT button 
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT | AUTO | SEARCH | BLANK | COMPUTER button |
MAGNIFY | FREEZE | PAGE | VOLUME |
|
ON |
| UP |
|
|
|
|
| ASPECT button | |
OFF |
| DOWN |
| |
|
|
|
| |
KEYSTONE | MY BUTTON | MUTE |
| |
| 1 | 2 |
|
|
POSITIONMENU
ENTER
ESCRESET
Zoom ring
Focus ring
CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use the BLANK function. (See the "Operating Guide" in the CD.) Any other method of blocking the projection light, such as attaching something to the lens or placing something in front of the lens, may cause the damage to the projector.
NOTE • The ASPECT button does not work when no proper signal is inputted.
•For the details of how to adjust the picture, please see the “Operating Guide” in the CD.
10