Dukane 8781 Preparations, Fastening the lens cover, Loading batteries into the remote control

Page 3
1.
2.

Preparations

Fastening the lens cover

To avoid losing the lens cover, please fasten the lens cover

to the projector using the enclosed strap.

1. Fix the strap to the strap hole of the lens cover. Thread one end of the strap through the strap hole of

the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not have a knot

in the strap at either end.

2. Fix the strap to the strap hole of the projector. Thread

the other end of the strap through the strap hole of the projector and make the loop there. Let the lens cover with the one end of strap through the loop.

Loading batteries into the remote control

Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

Holding the hook part of the battery cover, remove it.

Align and insert the two AA batteries

(HITACHI MAXELL, Part No.LR6 or R6P)

according to their plus and minus terminals as indicated in the remote control.

3. Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

Keep a battery away from children and pets.

Do not recharge, short circuit, solder or disassemble a battery.

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.

Obey the local laws on disposing the battery.

Image 3
Contents USER’S Manual Contents of package ContentsLoading batteries into the remote control PreparationsFastening the lens cover On a horizontal surface Suspended from the ceiling ArrangementConnecting your devices Connecting your devices Inserting the SD card Using a USB storageUsing an SD card Using the slot cover lock for securityTurning on the power Connecting power supplyAdjusting the projectors elevator Displaying the picture Turning off the power Type number 456-8755G Replacing the lampHigh Voltage High Temperature Type number MU04951 Cleaning and replacing the air filterReplacing the internal clock battery Using the CD manual Regulatory notices Declaration of Conformity FCC Statement warningFor the Customers in Canada FCC Important note Information for users applicable in European Union countriesSpecifications SpecificationsTrademark acknowledgment Warranty and after-service
Related manuals
Manual 2 pages 62.18 Kb