Connecting power supply
1. Put the connector of the power cord into the AC inlet of the projector.
2. Firmlyoutlet. plug the power cord’s plug into the
AC inlet | Power cord |
WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
•Only use the power cord that came with the projector. If it is damaged, contact to your dealer to newly get correct one.
•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Never modify the power cord.
ENGLISH
Turning on the power
1. Make sure that the power cord is firmly and correctly connected to the projector and the
outlet.
2. Remove the lens cover, and set the power switch to the ON position (marked “׀”).
3. Press the STANDBY/ON button on the projector or the remote control.
The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green.
STANDBY/ON button
POWER indicator
COMPUTER
Power switch
WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings.
NOTE • Please power on the projector prior to the connected devices.
•When the AUTO ON of the OPTION menu is set to the TURN ON, and the power was turned off by the power switch last time, turning the power switch on makes the projection lamp light on without pushing the STANDBY/ON button. For more information, please see the “Operating Guide” in the CD.