Cisco Systems WRT110 Wireless Wireless MAC Filter, Access Restriction, MAC Address Filter List

Chapter 3

Advanced Configuration

WEP

WEP is a basic encryption method, which is not as secure as WPA/WPA2.

Security Mode > WEP

Encryption  Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits). The default is 40/64 bits (10 hex digits).

Passphrase  Enter a Passphrase to automatically generate WEP keys. Then click Generate.

Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually.

TX Key  Select which TX (Transmit) Key to use. The default is 1.

Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.

Wireless > Wireless MAC Filter

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.

Wireless > Wireless MAC Filter

Wireless MAC Filter

Enabled/Disabled  To filter wireless users by MAC Address, either permitting or blocking access, select Enabled. If you do not wish to filter users by MAC Address, keep the default setting, Disabled.

Access Restriction

Prevent  Select this to block wireless access by MAC Address. This button is selected by default.

Permit  Select this to allow wireless access by MAC Address. This button is not selected by default.

MAC Address Filter List

Wireless Client List  Click this to open the Wireless Client List screen.

RangePlus Wireless Router 17