Chapter 3
Advanced Configuration
Status > Router
The Router screen displays information about the Router and its current settings.
Status > Router
Router Information
Firmware Version This is the version number of the Router’s current firmware.
Current Time This shows the time set on the Router.
Internet MAC Address This is the Router’s MAC Address, as seen by your ISP.
Host Name If required by your ISP, this was entered on the Basic Setup screen.
Domain Name If required by your ISP, this was entered on the Basic Setup screen.
Internet Connection
This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Basic Setup screen.
Click Refresh to update the
Status > Local Network
The Local Network screen displays information about the local, wired network.
Status > Local Network
Local Network
Local MAC Address The MAC address of the Router’s local, wired interface is displayed here.
Router IP Address This shows the Router’s IP address, as it appears on your local network.
Subnet Mask This shows the Subnet Mask of the Router.
DHCP Server
DHCP Server The status of the Router’s DHCP server function is displayed here.
Start IP Address For the range of IP addresses used by devices on your local network, the starting IP address is shown here.
End IP Address For the range of IP addresses used by devices on your local network, the ending IP address is shown here.
DHCP Clients Table Click this button to view a list of PCs that are using the Router as a DHCP server.
DHCP Clients Table
RangePlus Wireless Router | 29 |
