2103 Modem Module
Section 2 Installation and Operation
2.5Connecting to Flowlink
After the 2103 is installed and the modem cable connected, you need to configure the 2103 in Isco’s Flowlink software.
Note
The 2103 Modem requires Flowlink 4.13 or later. Earlier ver- sions do not support the Modem. The Modem requires that the 2100 Series modules it connects to have a code version 1.06 or greater.
Open Flowlink and go to the connect box (Figure
Figure 2-3 Flowlink Connect Screen
Select Modem and then select the type of modem that your com- puter system is using. Enter the phone number of the phone line that is being used by the 2103.
When you have entered the modem connection information, click on the 2100 Series box to the upper right.
Detailed Flowlink instructions are beyond the scope of this manual. Flowlink’s operating instructions are available in a Windows Help format. You can access the help topics for an active window by clicking on its Help button or by pressing F1 on your computer’s keyboard. You can also access Help topics by selecting Help from the Flowlink menu.
